rood blauwe elepsis logo Belegger.nl

Koffiekamer Terug naar discussie overzicht

3D printing

6.220 Posts
Pagina: «« 1 ... 248 249 250 251 252 ... 311 »» | Laatste | Omlaag ↓
  1. mjmj 31 december 2020 10:45
    Ja Noba, goed lezen is aan jou wel besteed! Het gros van de beleggers en shorters kijkt er over heen.
  2. [verwijderd] 31 december 2020 13:36
    Op het moment zijn de LI batterijen afhankelijk van Graphite mijnen. de EU (het westen) wilt al jaren minder afhankelijk zijn van de levering van deze grondstof en heeft in oa Australie, Canada en tegenwoordig ook in Zweden het mijnen van Graphite hoog op de prioriteitenlijst staan.

    [i]Silicon can absorb more lithium ions because these two materials form an alloy, the theoretical capacity of which is much higher than that of graphite. Silicon also requires less voltage for charging, and allows for reduced overvoltage. In addition, silicon allows the use of an anode that is much thinner and denser than a graphite one, and has a greater ability to draw lithium ions from the ion cloud created by the concentration gradient. Therefore, the silicon particles will be charged first, after which lithium ions will be incorporated into the graphite.

    All this means that a silicon anode with 30% silicon will be charged during the first 70% of a charging cycle. Thereafter, the graphite will quickly become charged but will slow down when the battery is approximately 80% charged. Thus, silicon solves the problem of lithium plating and opens the door for fast charging.


    Blijft graphite nodig Met de toevoeging van silicon Anode. Ik lees een tijd terug dat graphite vooral voorkomt dat de batterij overhit raakt. Met alleen silicon wordt dit vermoed ik opnieuw een probleem, dus het zal dan een combinatie moeten worden waarin graphite als een soort beschermlaag voor hitte wordt gebruikt?

    www.tesmanian.com/blogs/tesmanian-blo...
  3. nobahamas 31 december 2020 13:55
    Klopt, koolstof zal waarschijnlijk ook nut hebben voor de binding, zeg maar als matrix om een sterke anode te vormen
  4. nobahamas 2 januari 2021 20:29
    Mijn gedachtes over Pyrogenesis en HPQ Silicon

    Pyrogenesis heeft enorm veel know-how en ervaring in de bouw en toepassing van plasma torches.
    En juist in deze tijd stapelt de vraag naar toepassingen op.
    Een bijzondere hittebron voor hoge temperaturen die in het verleden alleen met fossiele brandstoffen opgewekt kon worden.
    Een hittebron met groot vermogen die in de verbrandingskamer ook zuurstofarm of zuurstofloos gehandhaafd kan worden is wel heel bijzonder.
    Op deze manier kunnen ingespoten stoffen volledig ontleed en of gedeeltelijk omgezet worden tot andere samenstellingen.
    Denk aan “waste to energy”, of “waste to commodity”, of “commodity to specialised product”.
    Jullie kennen de vele processen, maar er zullen snel meer processen volgen.
    HPQ Silicon draait nu met één zo’n speciaal proces, wat zeker een winstgevende business zal worden.
    De potentie om een aandeel te leveren in de optimalisering van de huidige Li-ion batterijen, en de ontleding van water tot waterstof.
    Ik denk dat het grootschalig gebruik van de Li-ion batterij voor mobiliteit nog wel enkele jaren voort kan, maar op termijn vervangen zal worden door de solid state lithium metal accu.
    Dit dus zonder koolstof anode en silica metal.
    Maar zover zijn we nog lang niet, en de optimale structuur voor de koolstof silicon anode is er ook nog niet (sandwich / carbon coating / etc).

    De grootste kans op korte termijn succes ligt bij Pyrogenesis op dit moment in de hoek van de staalindustrie, vervangen van fossiele branders door elektriciteit gevoede plasma torches.
    De eerste grote opdrachten verwacht ik binnen enkele maanden, en misschien volgt de toepassing bij cement fabrieken erg snel.
    Waar ik op korte termijn ook goede kansen zie is de omzetting van methaan naar waterstof en acetyleen, en of vloeibare (minder schadelijke) brandstof.
    Methaan is als broeikasgas 10 x zo schadelijk als CO2 en komt bij vele processen en boorputten vrij.
    Op termijn zie ik ook kansen om een proces te ontwikkelen tot productie van lithium metal…

    Ik heb geen aandelen HPQ, mede omdat ik vind dat ze op dit moment te duur zijn.
    En ook omdat de verwachtingen te groot zijn, zeker voor korte termijn.
    De exposure aan HPQ door bezit van Pyrogenesis is mij groot genoeg.

    Kortom ik verwacht veel van Pyrogenesis, en zeker binnen dit jaar
  5. MadMushroom 5 januari 2021 15:02
    Even uit interesse, wie zijn Rooster & Dutchpatience op CEO.CA? :D
    Ik heb zelf geen account daar, dus lees enkel.
    Zijn er nog andere die er wel posten?
  6. na de crash 6 januari 2021 12:22
    Lijkt erop dat de democraten alsnog de meerderheid in de Amerikaanse senaat gaan halen.

    Indirect belangrijk voor bedrijven als PYR die mee zullen profiteren van herneming klimaatdoelstellingen door de USA. Zonder een meerderheid in de senaat had dat sowieso een no-go geweest door de republikeinen die dat zouden blokkeren.

    Een Amerika dat gaat voor een ambitieus klimaatdoel heeft dan ook weer zijn weerslag op andere landen. Kan alleen maar positief bijdragen.
  7. MadMushroom 7 januari 2021 18:26
    quote:

    nobahamas schreef op 27 augustus 2020 21:37:

    [...]
    DDD is het fonds waarin ik nooit geloofd heb. Design software o.a. voor additive manufacturing, daar geloof ik wel in.

    Plaatjes spreken boekdelen
    3D systems verkoopt een deel van hun software tak. Vandaag ±92% dabei.
    Materialise blijft ook goed doorknallen, SLM solutions herstelt ook.
  8. [verwijderd] 11 januari 2021 08:32
    quote:

    MadMushroom schreef op 7 januari 2021 18:26:

    [...]

    3D systems verkoopt een deel van hun software tak. Vandaag ±92% dabei.
    Materialise blijft ook goed doorknallen, SLM solutions herstelt ook.
    het ging wel heel hard , Vrijdag 8 -1-2021,met de 3D aandelen
    DDD topte zelfs op 31(sloot onder 24), MTLS op 79(sloot op 70)
    Idem SSYS, SLM,Exone, Vjet,etc.

    ETF Prnt van Mevrouw Wood zelfs 38 (1yr: +65%),sloot op 37.

    3D Systems up nearly 30% after strong preliminary Q4 numbers
    Jan. 07, 2021 8:35 AM ET3D Systems Corporation (DDD)By: Stephen Alpher, SA News Editor23 Comments

    The company expects Q4 revenue of $170M-$176M vs. estimates of $140M.
    Non-gaap operating income is expected to be $11M-$19M vs. $5.6M earned in Q4 one year ago.

    CEO Jeffrey Graves: "Our Team’s ability to deliver over 20% consecutive-quarter revenue growth in both business units, while executing large scale restructuring, was particularly gratifying to see."

    The company also announces the close of the sale of its non-core software business for cash proceeds of about $64M. Roughly $21M of this was used to pay down debt.
  9. [verwijderd] 12 januari 2021 00:07
    quote:

    hosternokke schreef op 10 juli 2020 00:02:

    [...]
    Bedankt voor de tip, verzoek zojuist verstuurd.
    Duurde even maar uiteindelijk de eerste berichten zojuist in m'n mailbox:

    PyroGenesis’ CEO to Present at the Sidoti Winter 2021 Virtual Conference on January 14.

    Direct gevolgd door een eerste correctie:
    AMENDED PRESS RELEASE: PyroGenesis’ CEO to Present at the Sidoti Winter 2021 Virtual Conference on January 13

    En tot slot:
    PyroGenesis Announces Guidance for Q4 2020

    MONTREAL, Jan. 11, 2021 (GLOBE NEWSWIRE) -- PyroGenesis Canada Inc. (http://www.pyrogenesis.com) (TSX: PYR) (OTCQB: PYRNF) (FRA: 8PY), a high-tech company, (the "Company", the “Corporation” or "PyroGenesis") that designs, develops, manufactures and commercializes plasma atomized metal powder, plasma waste-to-energy systems and plasma torch products, is pleased to provide guidance for the fourth quarter, and full year, both ending December 31st, 2020.
    Based on preliminary financial information, and subject to year-end closing adjustments, PyroGenesis expects revenue for the fourth quarter 2020 to be between $3 - $5 million, resulting in total revenues for the fiscal year ending 2020 of approximately $14 - $16 million, as compared to $1.07 million (Q4 2019) and $4.8 million (FY 2019), respectively.
    The Company also expects earnings per share (“EPS”) for the fourth quarter to be in the range of $0.10 - $0.12, and for the fiscal year ending 2020 of between $0.22 - $0.24 , as compared to a loss of $0.04 (Q4 2019) and a loss of $0.07 (FY 2020), respectively.
    The Q4 2020 guidance and actual 2019 results noted above are summarized in the following table below:

  10. mjmj 12 januari 2021 11:08
    Merkwaardige fout... kan er iets aan worden afgelezen? Dit zijn de twee tabellen:

  11. mjmj 12 januari 2021 14:52
    Optie tot terugkopen van aandelen:

    MONTREAL, Jan. 12, 2021 (GLOBE NEWSWIRE) -- PyroGenesis Canada Inc. (http://www.pyrogenesis.com) (TSX: PYR) (OTCQB: PYRNF) (FRA: 8PY), a high-tech company, (the "Company", the “Corporation” or "PyroGenesis") that designs, develops, manufactures and commercializes plasma atomized metal powder, plasma waste-to-energy systems and plasma torch products, is pleased to announce today that it intends to implement a normal course issuer bid ("NCIB") through the facilities of the Toronto Stock Exchange ("TSX") or alternative trading systems.

    Pursuant to the NCIB, PyroGenesis may purchase, from time to time, over a period of 12 months starting January 14th, 2021 and ending January 13th, 2022, up to 5,000,000 common shares (approx. 3.14% of its common shares issued and outstanding as of January 4th, 2021). As of January 4th, 2021, there were 159,145,992 common shares of PyroGenesis issued and outstanding. On any given day, during the NCIB, PyroGenesis may only purchase up to 83,342 common shares, which is equivalent to 25% of the Average Daily Trading Volume of 333,370 calculated based on the trading volumes on the TSX from November 20th, 2020 (being the first day PyroGenesis was listed on the TSX) to December 31st, 2020.

    Purchases under the NCIB may commence as of January 14th, 2021
6.220 Posts
Pagina: «« 1 ... 248 249 250 251 252 ... 311 »» | Laatste |Omhoog ↑

Neem deel aan de discussie

Word nu gratis lid van Belegger.nl

Al abonnee? Log in

Direct naar Forum

Zoek alfabetisch op forum

  1. A
  2. B
  3. C
  4. D
  5. E
  6. F
  7. G
  8. H
  9. I
  10. J
  11. K
  12. L
  13. M
  14. N
  15. O
  16. P
  17. Q
  18. R
  19. S
  20. T
  21. U
  22. V
  23. W
  24. X
  25. Y
  26. Z
Forum # Topics # Posts
Aalberts 466 7.001
AB InBev 2 5.481
Abionyx Pharma 2 29
Ablynx 43 13.356
ABN AMRO 1.582 51.189
ABO-Group 1 22
Acacia Pharma 9 24.692
Accell Group 151 4.132
Accentis 2 264
Accsys Technologies 23 10.497
ACCSYS TECHNOLOGIES PLC 218 11.686
Ackermans & van Haaren 1 188
ADMA Biologics 1 34
Adomos 1 126
AdUX 2 457
Adyen 14 17.647
Aedifica 3 901
Aegon 3.258 322.645
AFC Ajax 538 7.086
Affimed NV 2 6.287
ageas 5.844 109.884
Agfa-Gevaert 14 2.048
Ahold 3.538 74.292
Air France - KLM 1.025 34.988
AIRBUS 1 11
Airspray 511 1.258
Akka Technologies 1 18
AkzoNobel 467 13.035
Alfen 16 24.318
Allfunds Group 4 1.468
Almunda Professionals (vh Novisource) 651 4.251
Alpha Pro Tech 1 17
Alphabet Inc. 1 405
Altice 106 51.198
Alumexx ((Voorheen Phelix (voorheen Inverko)) 8.486 114.812
AM 228 684
Amarin Corporation 1 133
Amerikaanse aandelen 3.835 242.699
AMG 971 133.042
AMS 3 73
Amsterdam Commodities 305 6.686
AMT Holding 199 7.047
Anavex Life Sciences Corp 2 482
Antonov 22.632 153.605
Aperam 92 14.900
Apollo Alternative Assets 1 17
Apple 5 380
Arcadis 252 8.731
Arcelor Mittal 2.033 320.536
Archos 1 1
Arcona Property Fund 1 286
arGEN-X 17 10.288
Aroundtown SA 1 219
Arrowhead Research 5 9.715
Ascencio 1 26
ASIT biotech 2 697
ASMI 4.108 39.078
ASML 1.766 105.971
ASR Nederland 21 4.451
ATAI Life Sciences 1 7
Atenor Group 1 469
Athlon Group 121 176
Atrium European Real Estate 2 199
Auplata 1 55
Avantium 32 13.609
Axsome Therapeutics 1 177
Azelis Group 1 64
Azerion 7 3.390